AC Chargers


AC Power Input 208-240VAC 60Hz., single phase @ 40A x 2. <10W continuous power (standby)
Power Connections Single/Dual Port Level 2, Level 2: (2) Independent 40A branch circuits
Required Breaker Panel (2) 40A Dual pole breaker (non GFCI type) for each port (80A total)
Output Current 30A Continuous x 2
Station Power Output 7.2kW Max (208-240VAC @ 40A) for each port
Wiring (2) 208-240 VAC and shared Earth/Ground. Total 5 wires
EV Charging Connector SAE J1772TM (Level 2)
EV Charging Cable 18′ Long
Onboard Controls Back lit soft-touch numeric keypad
Display 3.5″ Back lit LCD monochrome (non-reflective, heated UV coated, with auto ambient light sensor)
Network Connectivity LAN: hard wired Cat 5 for master/slave stations. WAN: Cellular network for the master station
RFID Reader Active multi-standard
Data Inputs/Outputs Rj45 x 2 (CAT-5 Ethernet cable connects Gateway station to Non-Gateway station)
Construction Housing: 1/4″ aluminum; Base Pad 1/2″ Aluminum; End Caps: Aluminum; Head: Polycarbonate plastic
Housing Color Gray
Enclosure rating NEMA 3R
Operating Temperature -30° to +130°F (-35° to +55°C)
Operating Humidity Up to 95% non-condensing
Terminal Block Temp. Rating 212°F (100°C)
Plug Out Protection Power cut-off per SAE J17712TM specifications
Ground Fault Protection 20mA CCID20 with 3 auto retry
Open Safety Ground Detection Monitors safety (green wire) ground connection
Surge Protection 6kV@3000A (additional protection at panel advised)
Power Metering Accuracy 2% -/+ Accuracy
Power Report/Store Interval 15-minute, aligned to hour
Grid Health Protection Line voltage & frequency detection logging
Safety Certification ETL Listed. Complies: UL 2231-1, UL 2231-2, UL 2231-2, UL 991; NEC Article 625 for J1772
Weight Pole Model: 30 lbs., Wall Model: 30 lbs., Pedestal: 73 lbs.
Dimensions Pole/Wall Mount: 54″ H X 7″ W Pedestal Mount: 70″ H X 7″ W. Direct Burial Pedestal Mount: 102″ H X 7″ W
Base pad Size 12″ x 12″ x 12″ (Pedestal Mount Only)
Pole MountDual Port Level 2
Wall Mount
Pedestal Mount